Big Mistakes in Miniature Paintings (pc news)
No commentsBy Mitchel Crane
I had just bought my first box of plastic Dwarfs. I admired the expertly painted miniatures on the cover and thought: How hard could it be? I just need to do a good job. So with this in mind, I dove right in and painted my very first miniatures ever. As in right out of the box with absolutely no clue whatsoever.
The result looked something like a cross between a cheap plastic souvenir and a Kindergarten finger painting. I wasn’t thrilled to say the least. But after some thought, I decided to keep the little guy and just keep trying, even though I had no clue as to what I had done wrong or how to get it right.
After a lot of practice, study, and good advice, I finally realized the things I did wrong, and if you remember to avoid them, you can bypass your own versions of the Finger-Painted Model and accelerate your journey to being an excellent painter.
Oops #1: Wrong brush for the job.
Use the right brush for the job. My first miniature was done with a single, cheap general purpose brush, which is no good for things like eyes. If you are going to detail small things like eyes, use a detail brush. One size does not fit all in painting miniatures.
Oops #2: Paint was too thick
This is where you get the Kindergarten look. While the miniatures come with detail, especially the Warhammer miniatures I paint, it will all disappear if your paint is too thick. Fuzzy Dwarf beards suddenly become amorphous facial bibs. Eyes become featureless blanks. Put a layer of paint on anything that’s straight out of the tube, and the detail goes away.
This is also responsible for creating a gooey look to paint jobs. Unthinned paint leaves lines in thick streaks which will create a texture on flat surfaces. You can sand these flat surfaces to fix this, but for anything else you’re stripping the miniatures and starting over. You can avoid this situation entirely by thinning the paint correctly and remembering that it comes in its tube, jar, or bottle far thicker than it should be applied.
Oops #3: Single layer of paint.
One layer of paint is good for a basic, table grade miniature if you’re painting wargaming units quickly. If you want more depth with a minimum of time and fuss you can:
1.) Put down a basecoat and drybrush.
2.) Put down a basecoat, wash with an ink, and then touch up with the same color.
3.) Put down a basecoat layer, a middle layer, and a highlight layer.
But just one layer of paint will make your miniature look flat.
Oops #4: Bottom details first.
Another good way to avoid detail blunders is to paint the bottom details first. If you overpaint when painting an inner detail first, it makes no difference, because the upper surfaces have not yet been painted. Do this with eyes especially, since you can give them razor sharp lines simply by overpainting around them with an upper layer coat.
Oops #5: Shortage of patience.
Painting requires a lot of time and patience. If you just throw on a coat of paint and move on because you want the model done now, you’re going to get coverage shortages, and thus a blotchy effect. I’ve noticed that white, yellow, orange, and red are especially unpleasant in this regard, and tend to require multiple coats.
Again, there are techniques to get decent miniatures quickly, but if you want to paint a competition or display piece, expect to expend a lot of time and patience. There’s just no way around it.
Oops #6: Do your homework.
A concept in general that would have helped me avoid some hard knocks with my models. Whenever starting anything new, first do your homework. You won’t become an expert without practice, but at least you’ll know what to practice, and that will put you well on your way.
These are general things to avoid that will keep you from straying into problems. They will also help minimize mistakes that will leave you wondering why on Earth your subject turned out the way it did.
Read about chicken health, chinchilla cats and other information at the Interesting Animals website.
The News Source On The Latest Technology And Computer Details
Restoring and Preserving Art
By Mitchel Crane
Art is a part of life and for some, it is their way of life. Others usually consider art as a worthy investment. Regardless of how you see art, restoring and preserving art pieces are important techniques to maintain their value. Painting restoration is a serious matter; that is why most people prefer to have their paintings professionally restored. However, if you like the thought of restoring your own pieces, lots of practice and familiarity with techniques are necessary. Because according to statistics, more paintings and art works are destroyed each year by inept restoration and cleaning than by accidental burning or fire.
Clouded varnish, dirt, and smoke are the usual culprits that cause paintings to become dirty. Restoring paintings by cleaning it is the logical step of most owners. However, wiping paintings with rags or whatever liquid is damaging. Art restoration professionals recommend researching restoration techniques on the internet or attending seminars on restoring paintings before embarking on a restoration mission.
Art works look more elegant and classic when preserved in their original frames. As it is, detaching paintings from their frames is necessary and important before the actual cleaning. Non-removal of the frames not only causes discomfort and unease in cleaning, it also causes scratches and abrasion. Remove the frames by laying the picture backside up on a flat surface layered with foam or cushion to avoid scratching the frames. Vacuum accumulated dust on the frames’ back and remove nails gently with a metal ruler and pliers. Secure the nails on board with labels of their previous positions. For example, secure and label the nails plucked from the lower right side of the frame as “lower right”. This way, each nail fits exactly on its previous place without causing added strain on the frame. Marking the frame is also a good idea to be able to return it to its original position.
After removing paintings from their frame, it is better to inspect the kind of dirt build-up on the paintings. Knowing the kind of dirt to be removed is necessary in finding and using the right product and tools. Anti-mildew solutions remove mildew build-up or “foxing” effectively. However, soaking the painting in these solutions damages the colors and the painting. To prevent this, soak or spray the solution on a cotton pad and wipe on the area affected with foxing. Follow up with a water-dipped cotton pad and wipe dry. Periodically check cotton pads to see if some color or paint was dissolved. For dirt build-up that requires light to medium cleaning, slicing an onion in half and dipping it in lemon juice remove grime and dirt off art work. Rub paintings with lemon-soaked onion using a circular motion for even application. Slice the onion regularly to expose a fresh layer. An alternative is using warm water with lemon detergent or washing soda. Finish either treatment by wiping their painting with a moist sponge and leaving it to dry. Art works respond to this treatment with improved depth of color.
Experts recommend leaving varnish removal and painting repair to the professionals. Art works do not sell well or look good if extensively damaged. As these types of restoration require complicated techniques, the chances of botching the job are high if done by amateurs. The job is expensive but make the value of your paintings appreciate.
To read about rose bubble tip anemone, where do hippos live and other information, visit the Interesting Animals site.
An Introduction to Tattoos
By Mitchel Crane
DOES IT HURT?
This article is based on this interrogative that it’s commonly asked by anyone new to this. The final answer is yes. Having needles pierce your tegument *does* make you suffer. But what you *really* need to do is ask yourself, “Can I handle the pain, and can I manipulate it?”
It’s not nearly as bad as what you can imagine.The symptoms present may vary according to where on your embody you get worked on. Skin or above the maraca (bone, astragal, etc.) tend to hurt less than other added areas. Also take note that some types of needles seem to spite more than others. I personally judge the needles used for outlining that produce a sharper cut .
Think about all I will present here before volunteering to get a tattoo.
Bottom Line: Do not rub with alcohol and don’t take drugs before a tattoo sessions. Both aspirin and alcohol thin your blood and promote excessive bleeding. Aspirin also decreases the clotting of blood, which will slow down your healing as well.
SHOULD I GET A TATTOO ?
Your answer to this question might not be so clear. Statistically one of 163 tattooed men and women had regretted their tattoos! By reading this article about getting a tattoo you will be able to decide for yourself knowing both the pros and dissadvantages to this.
HOW TO GET RID OF A TATTOO?
This is *NOT* easy at all, and is *NOT* cheap. Expect to pay $1,000 to remove even a fairly small-sized tattoo if you’re looking at laser surgery. Expect to have a noticeable ugly scar if you go with a non-laser technique. Expect to pay for every penny out of your own pocket because health insurance companies will not pay for tattoo removal. There may not be a laser surgery specialist in your area.
*WHY* WOULD YOU WANT A TATTOO IN THE FIRST PLACE?
People get tattoos for different reasons. Is it to please your partner?
Is it because you want to belong to a group that has tattoos? Do you identify with a certain subculture known for tattoos? Do you want to show your independence, individuality or uniqueness?
These are all valid reasons, and why many people get tattooed. However, because of the permanency of your tattoo, try to look at yourself infive, 10, or even 20 years. What will you be doing at that time? You might be a free-spirited college student now, and a web of vines on your wrist would look really lovely. However, are you planning to work in a very conservative field after you graduate? Will others look at your tattoo in a bad way? Will you have to hide it with long sleeve shirts?
Are you *willing* to wear long sleeve shirts if the environment is negative?
CONCLUSION
If you want to go through with getting a tattoo go online and check some red-tattoos.com designs . A tattoo design consists of both the actual design and the outline . These are needed but if you don’t have an outline for a tattoo design , don’t worry , the tattoo expert can do it for you or you can do it yourself with photoshop. Make sure before you go through with this that you view as many tattoo photos as possible with different tattoo designs so that your final choice will be a better one.
Article Source : Article King Pro - Free Reprints and Distribution
Information on house beetles can be found at the Interesting Animals site.
Thursday, December 31st, 2009 at 5:50 pm and is filed under electronics. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.
